Watching TV while taking a bath is a luxurious experience everyone craves. As installing a TV in the bathroom is becoming a trend, it is important to ensure it is safe from water damage. Waterproofing your TV will eliminate the risks of electrical hazards and prolong its lifespan. Here is a step-by-step procedure of how to waterproof TV for bathroom.
Waterproofing a bathroom TV involves enclosing it in a waterproof case or installing it behind a sealed, waterproof panel to protect it from moisture and humidity. Ensure proper ventilation and professional installation for safety.
How To Waterproof TV For Bathroom | Pro Guide
Step 1: Choose the right TV
When choosing a TV for your bathroom, you must select one specifically designed for use in wet environments. Look for one that is waterproof and has an IP rating of IP65 or higher. This ensures that the TV is completely protected against water jets. It should also be corrosion-resistant.
Step 2: Purchase a waterproofing kit
If you already have a TV not designed for use in a wet environment, you can purchase a waterproofing kit to make your TV waterproof.
The kit should include a waterproof case designed to fit your TV and be large enough to accommodate it. It should also come with a lens allowing the IR signal and the sound to pass through.
Step 3: Cover all openings
Before placing your TV into the waterproof case, you must ensure that all the openings are covered. This includes the buttons, ports, and vents. You can use silicone sealant to cover these openings, ensuring that no water can penetrate the case.
Step 4: Install the TV into the waterproof case
Once all the openings are covered, install the TV into the waterproof case. Use the instructions with the kit to ensure the TV is secured properly. Ensure that the case is sealed tight using the provided screws and that there are no gaps for water to enter.
Step 5: Test the TV
Before installing your newly waterproof TV in your bathroom, you must test it to ensure it works properly. Turn it on and check the sound and picture quality.
Check the remote control to ensure that it is functioning properly. Use a splash of water to simulate the bathroom environment and observe its reaction.
Also Read: Do I Need A Waterproof Tv For Bathroom?
How Much Water Will Damage A Tv?
The amount of water that can damage a TV depends on how much and long it’s there.
If the TV is small, like an iPhone or iPad, the screen may crack if you drop it in water. This would mean the screen would stop working but could be fixed with a new screen.
If there was a small amount of water on your TV for a short time (less than an hour), then your TV should be fine. It could have mildew or corrosion when you unplug it, but if you don’t use it while wet and let it dry out completely before plugging it back in, there shouldn’t be any lasting damage.
If there was a large amount of water on your TV for a long time (more than 24 hours), then there’s probably some internal damage that must be repaired before your TV will work again.
Also Read: How To Build A Waterproof Tv Enclosure?
What Happens If Water Falls On Tv?
The answer depends on how much water, and what type of TV you have.
If the TV is a plasma or LCD, you should be safe with up to 1.5 gallons of water. Or if it’s an older CRT TV—the kind with a tube—then you’ll want to stay away from any amount of moisture.
If it’s just a small amount of water, you might be okay if it’s just a little bit of water that gets on your screen. But if it’s a lot of water, that can cause serious damage.
The first thing that will happen is that you’ll see some sparkles on your screen as the moisture enters and then evaporates off of it. This could last anywhere from five minutes to several hours, depending on how much water there was in the first place!
After this initial sparkle effect wears off, things will start getting worse: You’ll see coloured lines or dots appearing on your screen as the moisture continues to evaporate off over time until, eventually, there’s no more left for it to evaporate off into (which means no more sparkles).
Also Read: Is It Safe To Put A Tv In The Bathroom?
Bottom Line:
When waterproofing your TV for your bathroom, it is crucial to follow the right procedure for optimal results. Choosing the right TV, purchasing the right waterproofing kit, covering all openings, installing the TV into the waterproof case, and testing the TV are all vital steps.
Incorporating these five steps of how to waterproof TV for bathroom will ensure that your TV is entirely secured against water damage and safe to use in a wet environment. Waterproofing your TV will not only add to your luxury bathroom experience but will also prolong your TV’s lifespan.