how to make tree climbing spikes

How To Make Tree Climbing Spikes?

Have you ever wanted to climb up a tall tree? If so, this guide is for you. It will break down the process of making your tree climbing spikes.

This guide will be invaluable for anyone who loves exploring and wants to reach the top of a tall tree safely. With the right tools and materials, you can make your tree-climbing spikes in no time. So let’s have a look at how to make tree climbing spikes.

Is It OK To Climb a Tree With Spikes?

Unless you’re a professional rock climber, the chances are that you’ve never given much thought to climbing a tree with spikes. However, if you find yourself in a situation where you need to scale a spiked tree, you should keep a few things in mind.

First, it’s essential to choose the right type of tree. Smaller trees with thinner branches are generally easier to climb than their larger counterparts.

Secondly, you’ll need extra care to avoid puncturing your skin on the spikes. Tree spikes are usually quite sharp and can cause severe injuries if you’re not careful.

Finally, make sure to use gloves or other hand protection. Climbing a spiked tree is possible but should not be attempted lightly. With a bit of caution and preparation, however, it can be a fun and rewarding experience.

Also Read: Where To Buy Tree Climbing Spikes | A Guide For Beginners?

How To Make Tree Climbing Spikes| Step-by-Step Guide

how to make tree climbing spikes

The Materials You’ll Need

Before you begin, ensure you have all the necessary tools and materials. You’ll need a bit of metal (usual steel), some hammering tools such as pliers and a hammer, a few nails, and a saw (or any tool that allows you to cut metal). Once you have these items together, it’s time to start!

Also Read: What Is The Lightest Climbing Tree Spike?

Step 1: Cut the Metal

Take your metal bar or sheet and use your saw or cutting tool to cut off two pieces approximately 12 inches long. These two pieces will become your climbing spikes.

Take one of these pieces and draw two lines across it at an angle (about 45 degrees). The lines should be approximately 3 inches apart from each other.  

Using your saw or cutting tool, cut along these lines. This will create two pointed ends on one side of the piece of metal, which will be used for gripping a tree’s bark as you climb it.  

Step 2: Shape the Metal

Now take both pieces of metal (the one with two pointed ends from Step 1 and the second piece that has not been modified) and use them to shape each piece into a “V” pattern by hammering them with pliers or another appropriate tool.

This helps ensure that when these spikes are placed onto someone’s boots, they won’t slip off easily while scaling the tree trunk. Ensure all edges are smooth so as not to cause any injuries when using them later on!

Step 3: Attach Nails To Secure Your Spikes

Using small nails (1/2 inch long), attach each spike securely onto its respective boot by pounding in four nails per spike – two on either side – at an angle to keep them in place during use.

Ensure all edges are smooth so as not to cause any injuries when using them later on! When finished, secure tightly with pliers or another appropriate tool before testing your newly made tree climbing spikes!  

Also Read: How To Use Tree Climbing Spikes?


Now you know, how to make tree climbing spikes. Making your tree-climbing spikes can be a fun and rewarding experience!

With just a few essential tools, some steel sheets or bars, and some nails, anyone can easily make their own set of spikes for scaling trees safely and efficiently.

Remember to always check for sharp edges after each step to avoid unnecessary injury during use! Happy Climbing!