How To Put Patches On a Backpack?

Adding patches to your backpack is a great way to express your personality and give it a bit of flair. It’s also easy to fix any small tears or holes in the fabric. But how exactly do you go about patching up your backpack? Don’t worry; we’ve got you covered! Here’s our guide on how to patch up your backpack in no time.

Tools and Materials You’ll Need

Before you get started, make sure you have all the suitable materials. You’ll need the following:

  • Your favourite patches (Iron-on or sew-on)
  • A clean cloth or sponge
  • A sewing needle and thread (for sew-on patches only)
  • An iron (for iron-on patches only)
  • An ironing board (for iron-on patches only)

How To Put Patches On a Backpack | Step-by-Step Guide

Step 1: Choose Your Patches Wisely

When choosing patches for your backpack, quality should be a top priority. This means opting for thicker material with a strong adhesive backing instead of thin fabric with a weak adhesive.

You don’t want the patches falling off after just one wear! Choose colours and designs that reflect your style, too. That way, you can repurpose your old backpack into something unique and special!

Step 2: Clean the Surface

Before applying a patch, ensure the backpack’s surface is clean and dry. Even a tiny particle of dust or dirt can prevent the adhesive from sticking properly, so it’s essential to make sure there are no contaminants on the surface of your bag before applying any patches.

This is especially important if you use fabric glue instead of iron-on patches—the glue will not stick if there are any particles present on the surface of the bag.

Step 3: Iron It On (Or Stick It On)

Now that everything’s prepared let’s start applying those patches! If you have chosen iron-on patches, all you need to do is set your iron at its lowest setting (with no steam) and press each patch onto its respective spot for 8-10 seconds each. Make sure that each patch adheres fully before moving on to another one.

If you have chosen fabric glue instead, apply some glue on the backside of each patch and press down firmly until fully secure. Let it sit for an hour or two before use so everything can be set correctly!  

Can you hot glue a patch to a backpack?

Hot glue can be a great way to attach a patch to a backpack. The key is to use a high-quality glue gun and apply a generous amount of glue to the patch and the backpack.

Once the glue has been applied, gently press the patch and hold it there for a few seconds to allow it to set. Consider using a clothespin or something similar to help keep the patch in place until the glue dries. Once the glue is dry, your patch will be securely attached to your backpack.


Now that you know how easy it is to put patches on a backpack, why not try it out today? Show off your personality with fun designs or cover up those unsightly holes easily; everyone will love your new look! Just remember – opt for thick material with strong adhesive backing and ensure there are no contaminants in the area before applying those patches! Happy patching!