It’s boring to take a long shower with cold water. You can control water temperature with a shower temperature adjuster and save hot water for later use. Here’s how to adjust shower temperature control, whether it’s too hot or cold.
To adjust shower temperature, turn the handle clockwise for hotter water and counterclockwise for cooler water until desired temperature is reached.
How To Adjust Shower Temperature Control | Step By Step Procedure
Is shower temperature control confusing to you? There’s no rocket science here. Here’s how to adjust your shower temperature.
Step 1: Turn off the water supply
Start by turning off the water supply. Firstly, turn off the water supply to your shower. You can do this by turning off the main water supply and then turning off each fixture (toilets, sinks and so on).
Or you might have a valve that controls all these in your home’s basement or garage. To turn off the main valve:
- Find it in your home’s plumbing system, usually near where all your pipes run through an access point in a wall or ceiling.
- Use a wrench to turn out this valve; it should come out quickly if you’ve never done this before
If you need help finding or turning off this valve, call a plumber; they’ll know exactly where it is and how best to get there without damaging anything else.
Step 2: Remove the handle or knob
Next, you have to remove the handle or knob. You need to loosen the screws first to remove the handle. After that, remove the handle or knob.
Step 3: Loosen the screws and remove the knob or handle
Loosen the screws with a screwdriver, then obliterate the handle or knob. To remove the temperature control knob or handle, use a screwdriver to loosen the screws.
Also Read: How Much Does An Outdoor Shower Cost
Why Can’t I Regulate My Shower Temperature | Possible Reasons
We all love a hot shower in the morning, but sometimes we get out feeling anything but. The issue could be that your shower temperature isn’t working correctly.
You might think it’s because you drank too much coffee or slept poorly. Read on if your water is too cold or too hot! Now we’ll explain what’s wrong.
A Faulty Thermostat
If you have ever noticed that the temperature of your showers fluctuates from hot to cold, it could be because of a faulty thermostat. The device regulates energy flow into the tank and maintains an even heat level for all users throughout the day.
But if it malfunctions or breaks down entirely (which can happen over time). Then your shower will run at different temperatures depending on your use, making things pretty uncomfortable!
Shower Valve Or Faucet Problem
If the water is too hot, but only in your shower, there may be a problem with the valve or faucet. You can check this by turning off all of your bathroom fixtures and then turning them back on one at a time until you find out which one is causing the issue.
If that doesn’t work, though, it may be time to call in an expert–the problem could be in your piping system instead of just at one fixture.
Also Read: How To Shower While Tent Camping
Piping Issue
If you’ve tried everything and still can’t regulate your shower temperature, the problem may be with the piping in your house. You’ll need a plumber if this is the case. They can check for leaks by turning off the water valve and checking for water from the pipe (“sweating”).
You still can’t regulate your shower temperature if there’s no leak. Then there might be something wrong with how hot or cold water flows through them.
The Hot Water Heater Is Broken
There might be a problem with your water heater. The thermostat is faulty, or it has been turned off by mistake. Check that the temperature is set correctly, and then reset the thermostat if necessary.
Check that there are no kinks in your plumbing system where it runs through cold-water pipes before entering your water heater. These can reduce pressure at various points along this route and cause problems with regulation and other issues like noisy pipes in wintertime (when they’re full of ice).
Check that all faucets are open entirely so they don’t restrict flow to any part of your house’s plumbing system, especially not behind toilets or sinks where water accumulates due to gravity! If necessary, adjust them so they’re wide open when not used for washing hands or brushing teeth, etcetera.
Also Read: How Do You Fold A Pop Up Shower Tent?
Bottom Line
Now you know how to adjust shower temperature control. The steps to adjust shower temperature control are simple and easy.
You can do it yourself without calling a plumber or hiring an expert. You can change the water temperature quickly and easily by following the instructions above.